Publikationen

Thermal stability of microstructure and texture in an ultra-fine grained (UFG) Al–Mg–Sc–Zr alloy
Sankaran, S.; Kumar, D.; Bibhanshu, N.; Bharadwaj Dash, B.; Suwas, S.; Peterlechner, M.; Rösner, H.; Divinski, S.; Mayer, J.; Wilde, G.
2025. Philosophical Magazine, 1–29. doi:10.1080/14786435.2025.2486591

Tellurium self-diffusion in crystalline GeSbTe phase change material
Gong, Q.; Jiang, H.; Peterlechner, M.; Divinski, S. V.; Wilde, G.
2025. Acta Materialia, 289, 120929. doi:10.1016/j.actamat.2025.120929

Assessment of the compositional requirements to form Fe-Mn-C austenite-martensite composites
Muench, M.; Gholizadeh, R.; Tsuji, N.; Peterlechner, M.; Eggeler, Y. M.; Riedel, J. L.; Eusterholz, M. K.; Heilmaier, M.; Kauffmann, A.
2025. doi:10.5445/IR/1000179806

On the Structure Sensitivity of CO Hydrogenation over Cu/ZrO: Insights into the Role of the Support and the Active Sites
Vergara, T.; Gómez, D.; Warmuth, L.; Enß, A. E.; Peterlechner, M.; Pallacán, R.; Diaconescu, V. M.; Simonelli, L.; Studt, F.; Concepción, P.; Jiménez, R.; Karelovic, A.
2024. ACS Catalysis, 14 (18), 14127 – 14138. doi:10.1021/acscatal.4c03803

Ferromagnetism in High Entropy Cantor alloy triggered and tuned by severe plastic deformation
Taheriniya, S.; Sonkusare, R.; Boll, T.; Divinski, S. V.; Peterlechner, M.; Rösner, H.; Wilde, G.
2024. Acta Materialia, 281, Art.-Nr.: 120421. doi:10.1016/j.actamat.2024.120421

Direct Recycling at the Material Level: Unravelling Challenges and Opportunities through a Case Study on Spent Ni‐Rich Layered Oxide‐Based Cathodes
Gnutzmann, M. M.; Makvandi, A.; Ying, B.; Buchmann, J.; Lüther, M. J.; Helm, B.; Nagel, P.; Peterlechner, M.; Wilde, G.; Gomez-Martin, A.; Kleiner, K.; Winter, M.; Kasnatscheew, J.
2024. Advanced Energy Materials, Art.-Nr.: 202400840. doi:10.1002/aenm.202400840

Hardness and microstructural evolution of CoCrFeNi high-entropy alloys during severe plastic deformation
Jiang, H.; Gong, Q.; Peterlechner, M.; Daum, L.; Rösner, H.; Wilde, G.
2024. Materials Science and Engineering: A, 908, Art.-Nr.: 146758. doi:10.1016/j.msea.2024.146758

Impact of Minor Alloying on Shear Transformation Zones and Strain Rate Sensitivity of a Pd-Based Bulk Metallic Glass Probed by Nanoindentation
Khademorezaian, S.; Peterlechner, M.; Rösner, H.; Divinski, S. V.; Wilde, G.
2023. Elsevier B.V. doi:10.2139/ssrn.4630995

Demystifying the Semiconductor‐to‐Metal Transition in Amorphous Vanadium Pentoxide: The Role of Substrate/Thin Film Interfaces
Esther, A. C. M.; Muralikrishna, G. M.; Chirumamilla, M.; Pinto, M. da S.; Ostendorp, S.; Peterlechner, M.; Yu Petrov, A.; Eich, M.; Divinski, S. V.; Hahn, H.; Wilde, G.
2024. Advanced Functional Materials, 34 (30), Art.-Nr.: 2309544. doi:10.1002/adfm.202309544

Extreme rejuvenation of a bulk metallic glass at the nanoscale by swift heavy ion irradiation
Khademorezaian, S.; Tomut, M.; Peterlechner, M.; da Silva Pinto, M. W.; Rösner, H.; Divinski, S.; Wilde, G.
2024. Journal of Alloys and Compounds, 980, Art.-Nr.: 173571. doi:10.1016/j.jallcom.2024.173571

Medium-range structural order in amorphous Ge2Sb2Te5 phase change material
Gong, Q.; Peterlechner, M.; Jiang, H.; Rösner, H.; Wilde, G.
2024. Applied Physics Letters, 124 (8), Art.-Nr.: 081901. doi:10.1063/5.0190359

Differences in structure and dynamics of ternary Pd–Ni-based bulk metallic glasses containing sulfur or phosphorous
Voigt, H.; Neuber, N.; Vaerst, O.; Demming, M.; Busch, R.; Peterlechner, M.; Rösner, H.; Wilde, G.
2024. Acta Materialia, 264, Art.-Nr.: 119574. doi:10.1016/j.actamat.2023.119574

Microstructure analysis of a CoCrFeNi high-entropy alloy after compressive deformation
Jiang, H.; Gong, Q.; Peterlechner, M.; Divinski, S. V.; Wilde, G.
2023. Materials Science and Engineering: A, 888, Art.-Nr. 145785. doi:10.1016/j.msea.2023.145785

Beam Effects on Atomic Dynamics in Metallic Glasses Studied With Electron Correlation Microscopy
Vaerst, O.; Wilde, G.; Peterlechner, M.
2023. Microscopy and Microanalysis, 29 (6), 1870–1878. doi:10.1093/micmic/ozad110

Tellurium self-diffusion in amorphous GeSbTe phase change materials
Gong, Q.; Jiang, H.; Perrin-Toinin, J.; Peterlechner, M.; Putero, M.; Portavoce, A.; Divinski, S.; Wilde, G.
2023. Acta Materialia, 257, Art.-Nr.: 119146. doi:10.1016/j.actamat.2023.119146

Additively manufactured equiatomic CoCrFeMnNi high entropy alloy: Precipitation-induced heterogeneity by mechano-chemical coupling
Taheriniya, S.; Choi, N.; Yang, S.; Sonkusare, R.; Yu, J. H.; Lee, J.-S.; Rösner, H.; Peterlechner, M.; Boll, T.; Gammer, C.; Hahn, H.; Divinski, S. V.; Wilde, G.
2023. Journal of Alloys and Compounds, 938, Article no: 168514. doi:10.1016/j.jallcom.2022.168514

High entropy alloy nanocomposites produced by high pressure torsion
Taheriniya, S.; Davani, F. A.; Hilke, S.; Hepp, M.; Gadelmeier, C.; Chellali, M. R.; Boll, T.; Rösner, H.; Peterlechner, M.; Gammer, C.; Divinski, S. V.; Butz, B.; Glatzel, U.; Hahn, H.; Wilde, G.
2021. Acta Materialia, 208, Art.-Nr.: 116714. doi:10.1016/j.actamat.2021.116714